Training

Training2020-02-03T07:17:27+02:00

Introduction to CPAS training unit

The specialized engineering training is one of the main engineering units in the Center of planning and architectural studies. It works in cooperation and coordination with the other units in preparing and organizing the training courses for the engineers from different specializations: urban planning, architecture, structural engineering, sanitary, civil engineering, project management, economic feasibility studies and pre-investment studies in Egypt and abroad. All of our courses are certified by the Egyptian engineers syndicate.

Engineering Courses

Engineering Courses

List of specialized courses held by the Center, aiming at helping engineers to acquire skills and special experiences in the various fields of engineering.

 

 

Computer Courses

Computer Courses

These courses aim at enhancing the engineers efficiency with computer software, this includes architecture, drawing, designing, video creation, and image manipulation programs used for modern engineering projects.

 

 

Engineering Courses

Serial No.Course CodeCourse title
1-1PLN 1Preparing Regional Development Plans
2-1PLN 2Preparing Structural Plan
3-1PLN 3Upgrading of informal Settlements
4-1PLN 4Urban Management and Development of New town
5-1PLN 5Rehabilitation and Development of Historical Areas
6-1PLN 6Preparing Urban Renewal Policies
7-1PLN 7Developing the cities centers
8-1PLN 8Roads Network Planning
9-1PLN 9Urban Traffic and Transportation Planning
10-1PLN 10Space- syntax
Serial No.Course CodeThe course title
1-2FSB. 1Feasibility Studies of Urban Projects
2-2FSB. 2Principles of Real Estate Assessment
3-2FSB. 3Principles of Real Estate Mortgage
4-2FSB. 4Principles of Real Estate Marketing
Serial No.Course CodeThe course title
1-3CVL 1Design of Concrete Structures according to Modern Specifications
2-3CVL 2Concrete Works
3-3CVL 3Cracks in R.C.: Types, Reasons, Classification and determining risk limits
4-3CVL 4Quality Assurance &Construction Evaluation using Non-Damaging Tests
5-3CVL 5Repairs &Strengthening of Concrete Elements
6-3CVL 6Quality Assurance in Construction Projects
7-3CVL 7Protecting Concrete Structures against Fire Dangers (Safe Design) &Methods of Repair
8-3CVL 8Methods of Repairing Fire Affected Concrete Structures
Serial No.Course CodeThe course title
1-4SRV 1Methods of Surveying &Field Work
2-4SRV 2Introduction using G.I.S. in Arial Surveying
3-4SRV 3Application of Total Station in Surveying
4-4SRV  4Application of Computer in Surveying
5-4SRV 5Application of Land Desktop 2005
6-4SRV 6Calculating Quantities &Producing Cross sections for Surveyed Roads
Serial No.Course CodeThe course title
1-5SNT 1Design of Water &Sewage Works
2-5SNT 2Water CAD
3-5SNT 3Basics of Domestic and Sewer water Treatment
4-5SNT 4Basic operations for treatment and purification of domestic water
5-5SNT 5Basics of Sewer water treatment
6-5SNT 6Monitoring and Control for operation of biological sewer water treatment station
7-5SNT 7Basics of industrial sewer water treatment
8-5SNT 8Quality in domestic and sewer water laboratories
9-5SNT 9Water quality monitoring
10-5SNT 10Quality in chemical laboratories
11-5SNT 11Quality systems in laboratories according to ISO 18028
12-5SNT 12Sewer and leakage water tests
13-5SNT 13Reduction of liquid wastes and solid wastes in Industrial sector
Serial No.Course CodeThe course title
1-6ROD 1Design &Planning of Roads
2-6ROD 2Preliminary Studies &Roads Design
3-6ROD 3Structural Design &Construction Tools for Roads
4-6ROD 4Specification for Roads Construction works
5-6ROD 5Improving Foundation Soil beneath roads
6-6ROD 6Testing Road Materials
7-6ROD 7Maintenance of Concrete road pavements
8-6ROD 8Maintenance of Roads & Bridges
9-6ROD 9Design of super pave (asphalt mixture)
10-6ROD 10Management of asphalt roads (Equipments, Material and Revision of designs)
Serial No.Course CodeThe course title
1-7TRF 1Principles of Traffic Engineering & Planning (Basic Level)
2-7TRF 2Traffic Planning & Engineering (Advanced Level)
3-7TRF 3Transportation Policies & Planning
4-7TRF 4Management & Planning of Transportation
Serial No.Course CodeThe course title
1-8MNG 1Construction Supervision in Building Projects
2-8MNG 2Construction Projects Management
3-8MNG 3Qualification for the International Certificate (PMP –Project Management Professional)
4-8MNG 4Construction Management for Architectural &Structural Projects
Serial No.Course CodeThe course title
1-9COT 1Introduction to preparing claims & recompenses in Local and International Contracts (FIDIC)
2-9COT 2Preparing specialized leaders in claims, recompenses, and clarifying local and international contracts
3-9COT 3Contracts writing (components, wording and definition) on international bases to avoid legal and contractual breaches
4-9COT 4Skills of invalidating commercial arbitration
Serial No.Course CodeThe course title
1-10EXU 1Technical Office Work (Analysis – Estimations – Cash flow charts) Cost Analysis & Specifications.
2-10EXU 2Management for Engineers
3-10EXU 3Modern Architectural Items
4-10EXU  4Execution flow Charts for Concrete &Finishes
5-10EXU 5Concrete Additives & Compound
6-10EXU 6Modern Architectural &Industrials Paintings, Claddings & Polishes
7-10EXU 7Modern Insulation for Basements, Pools & Tanks
8-10EXU 821st Century Concrete: Polymer Concrete – Fiber Concrete
9-10EXU 9Cracks Treatment Restoration Methods &Material
10-10EXU 10Building Collapse: Reasons &Treatment
11-10EXU 11Real Estate Information for Engineers
Serial No.Course CodeThe course title
1-11EVR 1Environmental Assessment for Urban Projects
2-11EVR 2Environmental Specifications for Structural &Architectural Construction
Serial No.Course CodeThe course title
1-12VAL 1Value Engineering

Computer Courses

There are three separate courses for the software, Revit for architecture, Revit for structural design, Revit for MEP. The courses aim is to teach trainees skills using Revit, and enhance their skills in design and collaboration with other departments in a project.

The course aims to raise the efficiency of engineers and increase their productivity through two specialized courses to introduce the trainee to the potential of the program directed to produce two-dimensional paintings in the form of horizontal projections, interfaces, executive drawings, etc. The aim of the course is to raise the efficiency of engineers and increase productivity through a specialized course for the process of building the building in the third dimension vacuum and work binoculars.

The course aims at introducing the trainee to how to draw and color the different architectural plots in a way that clarify the design concept, and helps in creating improved and more realistic images of designs for engineers and clients alike.

The course aims at getting trainees to create a realistic 3D images of the project. They learn how to put the different materials of the building elements. They also learn how to use the appropriate lighting technique, adding natural backgrounds to the building that increases the reality of the final product of the trainee, and to help the architect to recognize the dimensions and aesthetics of the building from all directions and modify or improve what he deems appropriate.

This course aims to teach trainees how to create engineering drawings, production of designs, making two dimensions or three dimensions models or video clips of the project in a timely manner. Also exploiting the networks feature where the project is being worked on in the same file by more than one engineer at the same time.

It is a program for the structural analysis of the different elements of the building. The analysis is done under the effects of vertical and horizontal loads. The program has evolved from the previous in ease and accuracy of inputting information and obtaining the results. The analysis process is done directly in simplified images, together with the possibility of solving all elements of the building easily, Design of structural elements

The program is used for project planning, management, and control. It also tracks time for the completion of each phase and its cost and return in the form of tables and curves and reports to achieve the project goal in the time period required and the expected return.

This course is for increasing the efficiency and effectiveness of the comprehensive development processes and the associated economic, social, and urban activities using one of the advanced information systems tools. The main tool used is Geographical Information Systems (GIS) due to their high efficiency in dealing with information of various components, and linking them directly with urban maps. The analysis with these systems are the basis of decision-making processes and build a strong database and information that contributes to the accuracy and speed of the decision-making process, especially with successive variables

The course is about the three main Microsoft Office programs (Word – Excel – PowerPoint). Its aim is to enhance the trainees skills in dealing with documents, how to write professionally using the computer, and teaching how to work tables and graphs and other ways of illustration and providing information.